Equipment List



ITEM DESCRIPTION CAPACITY
  EARTHWORKS  
1 DOZER, CATERPILLAR D-8/D-9
2 GRADER, CATERPILLAR G-12
3 BACKHOE, CATERPILLAR 3/4 CY
4 BACKHOE, CATERPILLAR  
5 BACKHOE/LOADER, RUBBER TIRE, CASE 3 CY/1/2 CY
6 BACKHOE/LOADER, RUBBER TIRE, JCB 3/4 CY
7 ENDLOADER, CATERPILLAR 6 CY
8 ENDLOADER, CASE 2 CY
9 BOBCAT, GEHL 1/4 CY
10 END LOADER, KUMATSU 3 CY
11 ROLLER COMPACTOR,INGERSOLL RAND  10 ton
12 ROLLER COMPACTOR, INGERSOLL RAND  1000 KG
     
  TRANSPORT  
13 DUMP TRUCK, MERCEDES BENZ 20 CY
14 TRUCK TRACTOR, MERCEDES BENZ 30 TON
15 TRAILER, HIGH BED, FRUEHAUF 30 TON
16 TRAILER, LOWBOY, FRUEHAUF 50 TON
17 TRAILER, PIPE W/OUT TRACTOR, FRUEHAUF 40 TON
18 TANKER, WATER, MERCEDES BENZ 3000 GAL.
19 TANKER, WATER, MERCEDES BENZ 5000 GAL
20 CRUDE OIL TANKER WITH PUMP,GMC 5000 GAL
21 TANKER, SEWAGE, GMC 9000 GAL.
22 FUEL TANKER, GMC 1500 GAL.
23 FUEL TANKER, GMC 300 GAL
24 LUBE TRUCK, GMC 6 REELS
     
  LIFTING EQUIPMENT  
25 CRANE, RT, HYD., GROVE 50/55 TON
26 CRANE, RT, HYD., LORAIN 35 TON
27 CRANE, TRUCK MTD., HYD., GROVE 30 TON
28 CRANE, RT, HYD., GROVE 40 TON
29 FORKLIFT, HYSTER 2.0 TON
30 FORKLIFT, HYSTER 7.5 TON
31 FORKLIFT, CATERPILLAR 25 TON
32 MANLIFT, 4x4x4, SIMMONS 40' - 0"
33 MANLIFT, 4X4X4 , JLG 40' - 0"
34 SIDE-BOOM, CATERPILLAR 63 TON
35 SIDE-BOOM,CATERPILLAR 27 TON
36 SIDE-BOOM, CATERPILLAR 9 TON
37 SIDE-BOOM, CATEPILLAR 63/65 TON
     
  CAR/PICKUPS  
38 SEDAN, TOYOTA 6 PASS.
39 SEDAN, MERCEDES BENZ 6 PASS.
40 SEDAN, BUICK 6 PASS.
41 SEDAN, TOYOTA 6 PASS.
42 LANDCRUISER, 4X4, TOYOTA  
43 SUBURBAN, CHEVROLET 1/2 TON
44 SUBURBAN, 4X4, TOYOTA 4 RUNNER 1/2 TON
45 PICKUP, TOYOTA HILUX 1/2 TON
46 PICKUP, CREWCAB, TOYOTA HILUX 1/2 TON
47 PICKUP, 4X4, CHEVROLET 3/4 TON
48 MECHANIC TRUCK, W/ TOOL BED, GMC 3/4 TON
49 AMBULANCE, TOYOTA 3/4 TON
50 PICK-UP 4 X 4, GMC 3/4 TON
51 PICK-UP 4 X 4, TOYOTA  
     
52 PERSONNEL CARRIERS  
53 BUS, TATA 66 PASSENGER
54 BUS, GMC 50 PASSENGER
55 BUS, CHEVROLET 50 PASSENGER
     
  AIR COMPRESSORS  
56 WHEEL MOUNTED, DIESEL, INGERSOLL/RAND CFM 750
57 WHEEL MOUNTED, DIESELATLAS COPCO CFM 350
58 WHEEL MOUNTED, DIESEL, INGERSOL RAND CFM 375/380
59 WHEEL MOUNTED, DIESEL, INGERSOL RAND CFM 250
60 STATION MOUNTED, ELECTRIC, BALMA 15 H.P.
     
  WELDING MACHINES  
61 GENERATOR, WHEEL MOUNTED, LINCOLN 400 AMP (DIESEL Pwrd.)
62 RECTIFIER, STATION, ELECTRIC, MILLER 300 AMP (ELECTRIC Pwrd.)
63 LINCOLN STT (SEMI AUTOMATIC FOR ROOT PASS)  
64 MAGNETIC PIPE LINER FOR FILLING AND CHAPPING  
  COMPACTORS  
65 ROLLER, DIESEL, INGERSOL/RAND 10 TON
66 ROLLER, DIESEL, INGERSOL/RAND 300 KILO
67 PLATE, GAS, HORY 5 H.P.
     
  HYDROTEST PUMPS  
68 HYDROTEST PUMP, GRACO 10,000 PSI
69 HYDROTEST PUMP , GRACO 6,000 PSI
     
  GENERATORS  
70 250 KW, KOMATSU 60 Hz 440V.
71 410 KW, CATERPILLAR 60 Hz 220 V.
72 125 KW, KOMATSU 60 Hz 220 V.
73 110 KW, CATERPILLAR 60 Hz 220 V.
74 30 KW, ONAN 60 Hz 220 V.
75 23 KW, ONAN 60 Hz 220 V.
     
  MIXERS  
76 CONCRETE, DIESEL Pwd. 1/2 CY
77 MORTAR, DIESEL Pwd. 1/2 CY
     
  ASPHALT/CONCRETE CUTTERS  
78 DIESEL Pwrd., WHEEL Mtd. 14" BLADE
     
  BOLT TIGHTENING EQUIPMENT  
79 HYD. TORQUE SET W/CABINET UP TO 4" NUT SIZES
80 HYDRATIGHT TIG TESCO BOLT TIGHTENER UP TO 5 5/8" SIZES
     
  PIPE EQUIPMENT  
81 COLD CUT MACHINE PIPE UP TO 72" DIA.
82 GUILLOTINE SAW, PNEU. PIPE UP TO 18" DIA.
83 POWERED PNEUMATIC LINE-UP CLAMP 16", 20", 24" - 36" DIA.
84 POWERED PNEUMATIC LINE-UP CLAMP 36" - 42" DIA.
85 EXTERNAL LINE-UP CLAMPS STANDARD THRU 52"
86 SINGLE BOOM ROCK DRILL 1" - 3"
87 DMI ROLLER CRADLES 16"- 60" DIA.
88 20"-42" PIPE BENDING MACHINE  
  - POWERED BY A CATERPILLER DIESEL  
  - ENGINE. MACHINE OPERATED BY A HYDRAULIC SYSTEM  
  - EQUIPPED TO ACCEPT AND OPERATED A HYDRAULIC WEDGE  
  - MANDRIL AND HYDRAULICALLY OPERATED AIR COMPRESSOR  
     
89 ABRASIVE CUTOFF SAW, 115V PIPE UP TO 4"
90 PIPE BEVEL MACHINE, OX/AC SET PIPE 4" TO 12"
91 PIPE BEVEL MACHINE, OX/AC SET PIPE 12 TO 18"
92 PIPE BEVEL MACHINE, OX/AC SET PIPE 18 TO 24"
93 PIPE BEVEL MACHINE, OX/AC SET PIPE 24 TO 30"
94 PIPE BEVEL MACHINE, OX/AC SET PIPE 30 TO 36"
95 PIPE BEVEL MACHINE, OX/AC SET PIPE 36 TO 42"
96 PIPE BEVEL MACHINE, OX/AC SET PIPE 48"
97 PIPE BEVEL MACHINE, OX/AC SET PIPE 56"
98 PIPE BEVEL MACHINE, OX/AC SET PIPE 60"
99 PIPE THREADING MACH. 1/2" THRU 2"
100 PIPE THREADING MACH. 1/2" THRU 4"
101 PIPE THREADING MACH. 2"THRU 4"
102 PIPE THREADING MACH. 3"THRU 6"
103 PIPE/CONDUIT BENDER, 115V. 1/2"THRU 2"
104 PIPE/CONDUIT BENDER, 115V. 2 1/2" THRU 4"
     
  REBAR EQUIPMENT  
105 REBAR CUTTER, ELECTRIC Pwrd. 1 1/2"
106 REBAR BENDER, ELECTRIC Pwrd. 1 1/2"
     
  BLAST/PAINT EQUIPMENT  
107 BLAST POT W/ALL ACCESSORIES
108 PAINT MACHINES, GRACO, PNEU. 45 - 1 RATIO
109 PAINT MACHINES, GRACO, PNEU. 30 - 1 RATIO
110 PAINT MACHINES, AIR POT AUTOMOTIVE QUALITY
111 BLAST/PAINT/HUMIDITY TEST EQPT CRITICAL COATING SPECS.
     
  PUMPS  
112 WATER PUMP, DIESEL Pwrd. 4"
113 WATER PUMP, DIESEL Pwrd. 2"
     
  CAMPS  
114 PORTABLE, SKID Mtd., PRE-FABBED 500 MAN
115 PERMANENT, ABQAIQ 150 MAN
116 PERMANENT, AIN NAKHL 400 MAN
     
  TEST EQUIPMENT, E & I  
117 MEGOHMMETER, 1 KV, HAND OPER.  
118 MEGOHMMETER, 5 KV, LINE OPER. 115V.  
119 PHASE & MOTOR ROTATION TESTER  
120 GROUND RESISTANCE TESTOR  
121 TRANSFORMER TURN RATIO TESTOR  
122 THERMOCPL/MILLIVOLT LOOP CALIBRATOR  
123 DIELECTRICTESTER, 115V.  
124 RELAY TESTOR  
125 BREAKER/OVERLOAD RELAY TESTOR  
126 POLYMETER  
127 PHASE ANGLE METER  
128 PHASE SEQUENCE ROTATION METER  
129 OSCILLOSCOPE, 100 MHZ  
130 VIBRATION METER  
131 SMART FIELD COMMUNICATOR  
132 TEMP.CONTROLLER/FLUIDIZED SAND BATH  
133 FREQUENCY COUNTER, 100 MHZ  
134 FUNCTION GENERATOR  
135 D.C. POWER SUPPLY, 0-50 V.  
136 CALIBRATOR UNIVERSAL RTD  
137 CALIBRATOR UNIVERSAL RTD  
138 INDICATOR THERMOCOUPLE  
139 P.P.S. FLEXITESTOR  
140 MINI-TEMP CALIBRATOR  
141 CURRENT CALIBRATOR  
142 FREQUENCY CALIBRATOR  
143 MULTIMETER  
144 MULTIMETER, DIGITAL  
145 MULTIMETER, ANALOG, CLAMPON 1"  
146 MULTIMETER, ANALOG, CLAMPON 2"  
147 MULTIMETER, DIGITAL, POCKET SIZE  
148 MULTIMETER, DIGITAL, BENCHTOP  
149 CALIBRATOR  
150 DECADE BOX,  
151 WALLY BOX, 0-30 PSI 0 - 30 PSI
152 WALLY BOX, 0-1660 IN/H20 0-1660 IN/H2O
153 MANOMETER,60-0-60 60-0-60
154 PRESSURE CALIBRATOR, 0-30 IN/H2O 0-30 IN/H2O
155 PRESSURE CALIBRATOR  
156 DEADWEIGHT TESTOR  
157 HYDRAULIC CALIBRATOR,  
158 GUAGE COMPARATOR, OIL ONLY  
159 QUICK TEST HAND PUMP, PRESSURE  
160 QUICK TEST HAND PUMP, VACUUM  
161 COMPOUND TESTGUAGE  
162 ANALOGUE TACHOMETERS 0 - 50,000
163 ANALOGUE TACHOMETERS 0 - 10,000
164 TEST GUAGE, VACUUM  
165 TEST GUAGE - 30 PSI
166 TEST GUAGE 0 - 60 PSI
167 TEST GUAGE 0 - 100 PSI
168 TEST GUAGE 0 - 200 PSI
169 TEST GUAGE 0 - 400 PSI
170 TEST GUAGE 0 - 600 PSI
171 TEST GUAGE 0 - 1000 PSI
172 TEST GUAGE 0 - 1500 PSI
173 TEST GUAGE 0 - 3000 PSI
174 TEST GUAGE 0 - 5000 PSI
175 TEST GUAGE 0 - 10,000 PSI
176 HEADSETS, SOUND POWER,(2 EA.)W/ CASE  
  COMPACTORS  
65 ROLLER, DIESEL 10 TON
66 ROLLER, DIESEL 300 KILO
67 PLATE, GAS 5 H.P.
     
  HYDROTEST PUMPS  
68 HYDROTEST PUMP 10,000 PSI
69 HYDROTEST PUMP 6,000 PSI
     
  GENERATORS  
70 250 KW 60 Hz 440V.
71 410 KW 60 Hz 220 V.
72 125 KW 60 Hz 220 V.
73 110 KW 60 Hz 220 V.
74 30 KW  
75 23 KW  
  MIXERS  
76 CONCRETE, DIESEL Pwd. 1/2 CY
77 MORTAR, DIESEL Pwd. 1/2 CY
     
  ASPHALT/CONCRETE CUTTERS  
78 DIESEL Pwrd., WHEEL Mtd. 14" BLADE
     
  BOLT TIGHTENING EQUIPMENT  
79 HYD. TORQUE SET W/CABINET UP TO 4" NUT SIZES
80 HYDRATIGHT TIG TESCO BOLT TIGHTENER UP TO 5 5/8" SIZES
     
  PIPE EQUIPMENT  
81 COLD CUT MACHINE PIPE UP TO 72" DIA.
82 GUILLOTINE SAW, PNEU. PIPE UP TO 18" DIA.
83 POWERED PNEUMATIC LINE-UP CLAMP 16", 20", 24" - 36" DIA.
84 POWERED PNEUMATIC LINE-UP CLAMP 36" - 42" DIA.
85 EXTERNAL LINE-UP CLAMPS STANDARD THRU 52"
86 SINGLE BOOM ROCK DRILL 1" - 3"
87 DMI ROLLER CRADLES 16"- 60" DIA.
88 20"-42" PIPE BENDING MACHINE  
  - POWERED BY A CATERPILLER DIESEL  
  - ENGINE. MACHINE OPERATED BY A HYDRAULIC SYSTEM  
  - EQUIPPED TO ACCEPT AND OPERATED A HYDRAULIC WEDGE  
  - MANDRIL AND HYDRAULICALLY OPERATED AIR COMPRESSOR  
     
89 ABRASIVE CUTOFF SAW, 115V PIPE UP TO 4"
90 PIPE BEVEL MACHINE, OX/AC SET PIPE 4" TO 12"
91 PIPE BEVEL MACHINE, OX/AC SET PIPE 12 TO 18"
92 PIPE BEVEL MACHINE, OX/AC SET PIPE 18 TO 24"
93 PIPE BEVEL MACHINE, OX/AC SET PIPE 24 TO 30"
94 PIPE BEVEL MACHINE, OX/AC SET PIPE 30 TO 36"
95 PIPE BEVEL MACHINE, OX/AC SET PIPE 36 TO 42"
96 PIPE BEVEL MACHINE, OX/AC SET PIPE 48"
97 PIPE BEVEL MACHINE, OX/AC SET PIPE 56"
98 PIPE BEVEL MACHINE, OX/AC SET PIPE 60"
99 PIPE THREADING MACH. 1/2" THRU 2"
  TOOLS  
177 CABLE CRIMPER W/ DIES 0-750 MCM
178 CABLE CUTTERS 0 - 750 MCM
179 CALIPHERS, INSIDE, SET 8",12",16'
180 CALIPHERS, OUTSIDE 8",12",16'
181 CALIPHER,VERNIER 12
182 CALIPHER,VERNIER 8"
183 CALIPHER,VERNIER 6"
184 CENTERPUNCH,METAL,MACHINIST 6" LONG
185 CLEANER,WATER/STEAM,JET SPRAY TO 1500 PSI,WHEEL MTD.
186 CLEANER,WATER/STEAM,JET SPRAY TO 3000 PSI,SKID MTD.
187 DIAL INDICATOR, W/ MAGNETIC BASE 0- 250" GAUGE
188 DIES,W/ HOLDERS,NPT,MANUAL, SET 1/2"- 2"
189 DIES,BOLT,UNF/UNC,W/ HOLDER,SET TO 1 1/4",UNF & UNC
190 DIES,BOLT,METRIC,W/ HOLDER,SET TO 32 MM
191 DRILL, MOTOR,HAND HELD, 110 V. 3/8" CHUCK
192 DRILL, MOTOR,HAND HELD, 110 V. 1/2" CHUCK
193 DRILL, MOTOR,HAND HELD, 110 V. 3/4" CHUCK
194 DRILL,MAGNETIC BASE, 110 V. 1 1/2" DIAMETER CAPACITY
195 DRILL,SHOP,STAND MTD, 110 V. 1 1/2" DIAMETER CAPACITY
196 DRILL, CONCRETE TL-22
197 DRILL, CONCRETE TL-72
198 DRILL BIT,H.S.TWIST,FOR METAL 3/32" THRU 1.0", SET
199 DRILL BIT,ANNULAR,CARBIDE TIP,METAL 1/2" THRU 1 1/4", SET
200 DRILL BIT, ROT.HAMMER,CARBIDE TIP 1/2" THRU 2", SET
201 DRILL BIT,MASONRY,CARBIDE TIP TWIST 1/2" THRU 1 1/4", SET
202 EXTRACTOR,BOLT,EASY-OUT,SET  
203 EXTRACTOR,PIPE,EASY-OUT,SET  
204 GRINDER,ANGLE ,110 V. 4" & 7" WHEEL
205 GRINDER,STRAIGHT,110 V. 4"-7" WHEEL
206 GRINDER,PENCIL,110 V. 1/4" - 2"
207 GRINDER,BENCH,110 V. 8"
208 GUAGE,PARALLEL BLOCKS SET, MACHINIST
209 GAUGE, WEDGE, SET SET, MACHINIST
210 GAUGE,FEELER, SETS SET, MACHINIST
211 GUAGE,THREAD PITCH SET, MACHINIST
212 GEAR PULLER,PROTO 20 TON
213 HAMMER,CARPENTER STD. CLAW
214 HAMMER,BALL PEEN 1 LB.
215 HAMMER,SHOP 3 LB.
216 HAMMER,SLEDGE 8 & 10 LB.
217 HAMMER,BREAKER,PAVEMENT,PNEU. 40 LBS.
218 HAMMER,CHIPPING,PNEUMATIC 10 LB.
219 HAMMER,JACK,PNEUMATIC 30 LBS.,125 PSI
220 HOIST,CHAIN OPERATED 1 1/2 TON
221 HOIST,CHAIN OPERATED 5 TON
222 HOIST,HANDLE OPERATED 3 TON
223 HOIST,HANDLE OPERATED 1 1/2 TON
224 JACK,PORTAPOWER,HYD.,W/ 9" BASE 10 TON
225 JACK,PORTAPOWER,HYD.,W/ 9" BASE 20 TON
226 JACK,PORTAPOWER,HYD.,W/ 9" BASE 50 TON
227 JACK,PORTAPOWER,HYD.,W/ 4" BASE 20 TON
228 JACK,PORTAPOWER, FLG.SPREADER 10 TON
229 LADDER,ALUMINUM,EXTENSION 30 FT.
230 LADDER,ALUMINUM,"A" TYPE 12 FT.
231 LADDER,WOOD,EXTENSION 30 FT.
232 LADDER,WOOD,"A" TYPE 12 FT.
233 LEVEL,TORPEDO 9" LENGTH
234 LEVEL, SHOP 24" LENGTH
235 LEVEL, SHOP 72" LENGTH
236 LEVEL, MACHINIST 12"
237 LEVEL, MACHINIST 24"
238 LEVEL, MACHINIST 72"
239 MICROMETER,OUTSIDE 0"- 1"
240 MICROMETER,OUTSIDE 1"-2"
241 MICROMETER,OUTSIDE,SET 0"- 6"
242 MICROMETER,OUTSIDE,SET 0"- 12"
243 MICROMETER,DEPTH,SET 0" - 12"
244 MICROMETER,INSIDE,SET 1/2" - 12"
245 PUNCH,KNOCKOUT CONDUIT,HYD. 1/2" - 4"
246 SAW,HOLE,SET,GREENLEE, 110 V. 3/8" - 4" DIA.
247 SAW,SAWZALL, 110 V. 6" STRAIGHT BLADE
248 SAW,PORTABAND,HAND HELD, 110 V. TO 4" CUTS
249 SAW,TABLE,ROTARY, 110 V. 20" BLADE
250 SAW,RADIAL ARM,ROTARY, 110 V. 12" BLADE
251 SAW,HAND,ROTARY,CARPENTERS,110 V. 8" BLADE
252 SAW,TILE,CIRCULAR, 110 V. 6" BLADE
253 SCAFFOLD,TUBULAR,W/ CLAMPS,SET LOT
254 SCRIBE,METAL,MACHINIST 8"
255 SCREWDRIVER SET FLAT ASSORTED SIZE
256 SCREWDRIVER SET PHILIPS ASSORTED SIZE
257 SQUARE,COMBINATION,MACHINIST 12" BLADE
258 SQUARE,FRAMING 24" LONG SIDE
259 SQUARE, TEE,MACHINIST 3 BLADES,12"24"36
260 SURVEY,THEODOLITE W/ TRIPOD W/ ALL ACCESSORIES
261 SURVEY,LEVEL,ENGINEERS W/TRIPOD W/ ALL ACCESSORIES
262 SURVEY,ROD,CHAINS,TARGETS, SETS W/ ALL ACCESSORIES
263 TAPS,BOLT, UNC/UNF,W/HOLDER,SET TO 1 1/4"
264 TAPS, BOLT,METRIC, W/ HOLDER,SET TO 32MM
265 TAPS,PIPE, NPT, W/ HOLDER, SET TO 2"
266 TORCH, OX/AC.,W/ GUAGES/HOSE SET MANUAL CUTS AS REQ'D
267 TORCH,TRACK W/ HOSE/TRACK, 110 V. AUTOMATIC PLATE CUTS
268 TORQUE WRENCH,MANUAL,MACHINIST 1/2 " DRIVE
269 TORQUE WRENCH,MANUAL,MACHINIST 3/4 " DRIVE
270 TORQUE WRENCH,MANUAL,MACHINIST 1"DRIVE
271 TORQUE MULTIPLIER 4 TO 1
272 VACUUM CLEANER,INDUSTRIAL, 110 V. 1 H.P. MOTOR
273 VIBRATOR,CONCRETE,W/ ENGINE 1 1/2" - 2 1/2" STINGERS
274 VIBRATOR,CONCRETE,W/ ENGINE 1" STINGER
275 VIBRATOR,CONCRETE,AIR DRIVEN 1 1/2" - 2 1/2" STINGERS
276 VISE, PIPE, TRI-POD MTD., CLAMP TYPE 6" CAPACITY
277 VISE, PIPE, TRI-POD MTD., CHAIN TYPE 12" CAPACITY
278 VISE, WORK BENCH TYPE 6' JAW, 12" OPEN CAP.
279 WRENCH,PIPE,JAW TYPE, SETS 10", 14", 18"
280 WRENCH,PIPE,JAW TYPE 24"
281 WRENCH,PIPE,JAW TYPE 36"
282 WRENCH,PIPE,BELT TYPE ADJUSTABLE TO 6"
283 WRENCH,PIPE,CHAIN TYPE ADJUSTABLE TO 6"
284 WRENCH,ADJUST SPANNER,SET 8", 10", 12"
285 WRENCH, COMB.,OPEN/BOX, SET 5/16" - 2"
286 WRENCH, COMB.,OPEN/BOX, SET 6 MM - 32 MM
287 WRENCH, IMPACT W/ SOCKETS,PNEU. 1/2" DRIVE,SOCKETS TO 1.5"
288 WRENCH, IMPACT W/ SOCKETS,PNEU. 3/4" DRIVE,SOCKETS TO 2"
289 WRENCH, IMPACT W/ SOCKETS,PNEU. 1"DRIVE',SOCKETS TO 2.5"
290 WRENCH, ALLEN, SETS 1/16-1/2
291 WRENCH, INCHES,W/SOCKETS, SET 1/4" - 1"
292 WRENCH, METRIC,W/SOCKETS, SET 6 MM - 32 MM
293 WRENCH,HAMMER FOR PIPING,SET 1 1/4" THRU 4 1/2"
195 DRILL,SHOP,STAND MTD, 110 V. 1 1/2" DIAMETER CAPACITY
196 DRILL, CONCRETE TL-22
197 DRILL, CONCRETE TL-72
198 DRILL BIT,H.S.TWIST,FOR METAL 3/32" THRU 1.0", SET
199 DRILL BIT,ANNULAR,CARBIDE TIP,METAL 1/2" THRU 1 1/4", SET
200 DRILL BIT, ROT.HAMMER,CARBIDE TIP 1/2" THRU 2", SET
201 DRILL BIT,MASONRY,CARBIDE TIP TWIST 1/2" THRU 1 1/4", SET
202 EXTRACTOR,BOLT,EASY-OUT,SET  
203 EXTRACTOR,PIPE,EASY-OUT,SET  
204 GRINDER,ANGLE ,110 V. 4" & 7" WHEEL
205 GRINDER,STRAIGHT,110 V. 4"-7" WHEEL
206 GRINDER,PENCIL,110 V. 1/4" - 2"
207 GRINDER,BENCH,110 V. 8"
208 GUAGE,PARALLEL BLOCKS SET, MACHINIST
209 GAUGE, WEDGE, SET SET, MACHINIST
210 GAUGE,FEELER, SETS SET, MACHINIST
211 GUAGE,THREAD PITCH SET, MACHINIST
212 GEAR PULLER,PROTO 20 TON
213 HAMMER,CARPENTER STD. CLAW
214 HAMMER,BALL PEEN 1 LB.
215 HAMMER,SHOP 3 LB.
216 HAMMER,SLEDGE 8 & 10 LB.
217 HAMMER,BREAKER,PAVEMENT,PNEU. 40 LBS.
218 HAMMER,CHIPPING,PNEUMATIC 10 LB.
219 HAMMER,JACK,PNEUMATIC 30 LBS.,125 PSI
220 HOIST,CHAIN OPERATED 1 1/2 TON
221 HOIST,CHAIN OPERATED 5 TON
222 HOIST,HANDLE OPERATED 3 TON
223 HOIST,HANDLE OPERATED 1 1/2 TON
224 JACK,PORTAPOWER,HYD.,W/ 9" BASE 10 TON
225 JACK,PORTAPOWER,HYD.,W/ 9" BASE 20 TON
226 JACK,PORTAPOWER,HYD.,W/ 9" BASE 50 TON
227 JACK,PORTAPOWER,HYD.,W/ 4" BASE 20 TON
228 JACK,PORTAPOWER, FLG.SPREADER 10 TON
229 LADDER,ALUMINUM,EXTENSION 30 FT.
230 LADDER,ALUMINUM,"A" TYPE 12 FT.
231 LADDER,WOOD,EXTENSION 30 FT.
232 LADDER,WOOD,"A" TYPE 12 FT.
233 LEVEL,TORPEDO 9" LENGTH
234 LEVEL, SHOP 24" LENGTH
235 LEVEL, SHOP 72" LENGTH
236 LEVEL, MACHINIST 12"
237 LEVEL, MACHINIST 24"
238 LEVEL, MACHINIST 72"
239 MICROMETER,OUTSIDE 0"- 1"
240 MICROMETER,OUTSIDE 1"-2"
241 MICROMETER,OUTSIDE,SET 0"- 6"
242 MICROMETER,OUTSIDE,SET 0"- 12"
243 MICROMETER,DEPTH,SET 0" - 12"
244 MICROMETER,INSIDE,SET 1/2" - 12"
245 PUNCH,KNOCKOUT CONDUIT,HYD. 1/2" - 4"
246 SAW,HOLE,SET,GREENLEE, 110 V. 3/8" - 4" DIA.
247 SAW,SAWZALL, 110 V. 6" STRAIGHT BLADE
248 SAW,PORTABAND,HAND HELD, 110 V. TO 4" CUTS
249 SAW,TABLE,ROTARY, 110 V. 20" BLADE
250 SAW,RADIAL ARM,ROTARY, 110 V. 12" BLADE
251 SAW,HAND,ROTARY,CARPENTERS,110 V. 8" BLADE
252 SAW,TILE,CIRCULAR, 110 V. 6" BLADE
253 SCAFFOLD,TUBULAR,W/ CLAMPS,SET LOT
254 SCRIBE,METAL,MACHINIST 8"
255 SCREWDRIVER SET FLAT ASSORTED SIZE
256 SCREWDRIVER SET PHILIPS ASSORTED SIZE
257 SQUARE,COMBINATION,MACHINIST 12" BLADE
258 SQUARE,FRAMING 24" LONG SIDE
259 SQUARE, TEE,MACHINIST 3 BLADES,12"24"36
260 SURVEY,THEODOLITE W/ TRIPOD W/ ALL ACCESSORIES
261 SURVEY,LEVEL,ENGINEERS W/ TRIPOD W/ ALL ACCESSORIES
262 SURVEY,ROD,CHAINS,TARGETS, SETS W/ ALL ACCESSORIES
263 TAPS,BOLT, UNC/UNF,W/HOLDER,SET TO 1 1/4"
264 TAPS, BOLT,METRIC, W/ HOLDER,SET TO 32MM
265 TAPS,PIPE, NPT, W/ HOLDER, SET TO 2"
266 TORCH, OX/AC.,W/ GUAGES/HOSE SET MANUAL CUTS AS REQ'D
267 TORCH,TRACK W/ HOSE/TRACK, 110 V. AUTOMATIC PLATE CUTS
268 TORQUE WRENCH,MANUAL,MACHINIST 1/2 " DRIVE
269 TORQUE WRENCH,MANUAL,MACHINIST 3/4 " DRIVE
270 TORQUE WRENCH,MANUAL,MACHINIST 1"DRIVE
271 TORQUE MULTIPLIER 4 TO 1
272 VACUUM CLEANER,INDUSTRIAL, 110 V. 1 H.P. MOTOR
273 VIBRATOR,CONCRETE,W/ ENGINE 1 1/2" - 2 1/2" STINGERS
274 VIBRATOR,CONCRETE,W/ ENGINE 1" STINGER
275 VIBRATOR,CONCRETE,AIR DRIVEN 1 1/2" - 2 1/2" STINGERS
276 VISE, PIPE, TRI-POD MTD., CLAMP TYPE 6" CAPACITY
277 VISE, PIPE, TRI-POD MTD., CHAIN TYPE 12" CAPACITY
278 VISE, WORK BENCH TYPE 6' JAW, 12" OPEN CAP.
279 WRENCH,PIPE,JAW TYPE, SETS 10", 14", 18"
280 WRENCH,PIPE,JAW TYPE 24"
281 WRENCH,PIPE,JAW TYPE 36"
282 WRENCH,PIPE,BELT TYPE ADJUSTABLE TO 6"
283 WRENCH,PIPE,CHAIN TYPE ADJUSTABLE TO 6"
284 WRENCH,ADJUST SPANNER,SET 8", 10", 12"
285 WRENCH, COMB.,OPEN/BOX, SET 5/16" - 2"
286 WRENCH, COMB.,OPEN/BOX, SET 6 MM - 32 MM
287 WRENCH, IMPACT W/ SOCKETS,PNEU. 1/2" DRIVE,SOCKETS TO 1.5"
288 WRENCH, IMPACT W/ SOCKETS,PNEU. 3/4" DRIVE,SOCKETS TO 2"
289 WRENCH, IMPACT W/ SOCKETS,PNEU. 1"DRIVE',SOCKETS TO 2.5"
290 WRENCH, ALLEN, SETS 1/16-1/2
291 WRENCH, INCHES,W/SOCKETS, SET 1/4" - 1"
292 WRENCH, METRIC,W/SOCKETS, SET 6 MM - 32 MM
293 WRENCH,HAMMER FOR PIPING,SET 1 1/4" THRU 4 1/2"
269 TORQUE WRENCH,MANUAL,MACHINIST 3/4 " DRIVE
270 TORQUE WRENCH,MANUAL,MACHINIST 1"DRIVE
271 TORQUE MULTIPLIER 4 TO 1
272 VACUUM CLEANER,INDUSTRIAL, 110 V. 1 H.P. MOTOR
273 VIBRATOR,CONCRETE,W/ ENGINE 1 1/2" - 2 1/2" STINGERS
274 VIBRATOR,CONCRETE,W/ ENGINE 1" STINGER
275 VIBRATOR,CONCRETE,AIR DRIVEN 1 1/2" - 2 1/2" STINGERS
276 VISE, PIPE, TRI-POD MTD., CLAMP TYPE 6" CAPACITY
277 VISE, PIPE, TRI-POD MTD., CHAIN TYPE 12" CAPACITY
278 VISE, WORK BENCH TYPE 6' JAW, 12" OPEN CAP.
279 WRENCH,PIPE,JAW TYPE, SETS 10", 14", 18"
280 WRENCH,PIPE,JAW TYPE 24"
281 WRENCH,PIPE,JAW TYPE 36"
282 WRENCH,PIPE,BELT TYPE ADJUSTABLE TO 6"
283 WRENCH,PIPE,CHAIN TYPE ADJUSTABLE TO 6"
284 WRENCH,ADJUST SPANNER,SET 8", 10", 12"
285 WRENCH, COMB.,OPEN/BOX, SET 5/16" - 2"
286 WRENCH, COMB.,OPEN/BOX, SET 6 MM - 32 MM
287 WRENCH, IMPACT W/ SOCKETS,PNEU. 1/2" DRIVE,SOCKETS TO 1.5"
288 WRENCH, IMPACT W/ SOCKETS,PNEU. 3/4" DRIVE,SOCKETS TO 2"
289 WRENCH, IMPACT W/ SOCKETS,PNEU. 1"DRIVE',SOCKETS TO 2.5"
290 WRENCH, ALLEN, SETS 1/16-1/2
291 WRENCH, INCHES,W/SOCKETS, SET 1/4" - 1"
292 WRENCH, METRIC,W/SOCKETS, SET 6 MM - 32 MM
293 WRENCH,HAMMER FOR PIPING,SET 1 1/4" THRU 4 1/2"
269 TORQUE WRENCH,MANUAL,MACHINIST 3/4 " DRIVE
270 TORQUE WRENCH,MANUAL,MACHINIST 1" DRIVE
271 TORQUE MULTIPLIER 4 TO 1
272 VACUUM CLEANER,INDUSTRIAL, 110 V. 1 H.P. MOTOR
273 VIBRATOR,CONCRETE,W/ ENGINE 1 1/2" - 2 1/2" STINGERS
274 VIBRATOR,CONCRETE,W/ ENGINE 1" STINGER
275 VIBRATOR,CONCRETE,AIR DRIVEN 1 1/2" - 2 1/2" STINGERS
276 VISE, PIPE, TRI-POD MTD., CLAMP TYPE 6" CAPACITY
277 VISE, PIPE, TRI-POD MTD., CHAIN TYPE 12" CAPACITY
278 VISE, WORK BENCH TYPE 6' JAW, 12" OPEN CAP.
279 WRENCH,PIPE,JAW TYPE, SETS 10", 14", 18"
280 WRENCH,PIPE,JAW TYPE 24"
281 WRENCH,PIPE,JAW TYPE 36"
282 WRENCH,PIPE,BELT TYPE ADJUSTABLE TO 6"
283 WRENCH,PIPE,CHAIN TYPE ADJUSTABLE TO 6"
284 WRENCH,ADJUST SPANNER,SET 8", 10", 12"
285 WRENCH, COMB.,OPEN/BOX, SET 5/16" - 2"
286 WRENCH, COMB.,OPEN/BOX, SET 6 MM - 32 MM
287 WRENCH, IMPACT W/ SOCKETS,PNEU. 1/2" DRIVE,SOCKETS TO 1.5"
288 WRENCH, IMPACT W/ SOCKETS,PNEU. 3/4" DRIVE,SOCKETS TO 2"
289 WRENCH, IMPACT W/ SOCKETS,PNEU. 1"DRIVE',SOCKETS TO 2.5"



Manpower



SL # MANAGEMENT/PROFESSIONAL PERSONNEL SAUDI FILIP. IND. M.E. SRI LANKA NEPAL KENIYAN BANGL.
1 GENERAL MANAGER 1              
2 OPERATION MANAGER     1          
3 CONSTRUCTION MANAGER   1 2          
4 MAINTENANCE MANAGER   1   1        
5 PROC/BUSINESS MANAGER 1   1          
6 ENGINEERING MANAGER   1 1          
7 QA/QC MANAGER   1         1  
8 SAFETY & HEALTH MANAGER   1 1          
9 MATERIALS MANAGER   1 1          
10 ADMINISTRATIVE SUPERVISOR 1 1 2          
11 GOVERNMENT RELATIONS 8     2        
12 ACCOUNTANT       3        
13 SENIOR SCHEDULER   1 1          
14 ESTIMATOR   3 3          
15 COMPUTER OPERATOR   8 8     3   2
16 MATERIAL CONTROLLER   2 2          
17 MATERIAL EXPEDITER   1            
18 DRAFTSMAN   2 2          
19 NURSE   1 1          
20 QA/QC INSPECTOR (CE, ME, EE, ECE)   6 4          
21 QA/QC LEAD AUDITOR   2            
22 QA/QC PAINTING INSPECTOR   3 2   1      
23 SAFETY SUPERVISOR   2 3          
24 CAMP SUPERVISOR     2          
25 SURVEYOR   1 1          
26 PROJECT MANAGER   2 2          
27 ENGINEER, CIVIL   4 4       1  
28 ENGINEER MECHANICAL   5 4       1  
29 ENGINEER ELECTRICAL 1 4 4       1  
30 SUPERINTENDENT, FAB SHOP   2            
31 SUPERINTENDENT, CIVIL   1 1          
32 SUPERINTENDENT, ELEC'L/INSTR.   3 1          
33 SUPERINTENDENT, PAINT/INSULATION   2 1          
34 SUPERINTENDENT, PIPE/,MECHANICAL   6 1          
35 GENERAL FOREMAN   4 4          
36 FOREMAN, CIVIL   3 5          
37 FOREMAN, STRUCTURAL STEEL   2 1          
38 FOREMAN, PIPING   10 3          
39 FOREMAN, ELECTRICAL   12 12          
40 FOREMAN, INSTRUMENATION   11 10          
41 FOREMAN, MILLWRIGHT   2 1          
42 FOREMAN, PAINT/BLAST   1 1          
43 FOREMAN, LABOR 3 4 6          
44 FOREMAN, EQUIP/OPER.       1        
45 REBARMAN 2 3 7          
46 CARPENTERS   12 13   10      
47 MASON   4 5   3      
48 TILE SETTER   2 2          
49 STRUCTURAL WELDER   8 4   3 2    
50 RIGGERS   2 3          
51 FABRICATOR 4 4 4          
52 PIPEFITTERS 4 22 8   2      
53 PIPEFITTERS HELPERS 2 10 14          
54 WELDERS, PIPE   18 30   2      
55 WELDERS, TIG   2 5          
56 ELECTRICIAN/ CABLE SPLICER 2 38 88   6     12
57 INSTRUMENT TECHNICIAN   14 26          
58 INSTRUMENT FITTER   5 6          
59 MILLWRIGHT TECHNICIAN   3 3          
60 HVAC TECHNICIAN   1 1          
61 PLUMBER   3 2         1
62 PAINTER/BLASTER 5 4 8         2
63 INSULATOR   4 2          
64 OPERATOR, MANLIFT   6 2          
65 OPERATOR, FORKLIFT 2 3 2          
66 OPERATOR, BACKHOE 2 3 4          
67 OPERATOR, DOZER 2 2 3          
68 OPERATOR, BOBCAT 2 2 4          
69 OPERATOR, LOADER 2 4 6          
70 OPERATOR, CRANE 2 6 8          
71 OPERATOR, SIDE-BOOM 2 4 5          
72 OPERATOR, GRADER   2 3          
73 DRIVER – HEAVY 14 4 12   1     1
74 DRIVER – LIGHT 15 2 5   1 10    
75 WAREHOUSEMAN     2         1
76 TIMEKEEPERS     3         1
78 CLERK/TYPIST 12 2 2         1
79 CHIEF MECHANIC   1            
80 MECHANIC, HEAVY 1 4 2          
81 MECHANIC, LIGHT 2 2 1          
82 AUTO ELECTRICIAN   2 2          
83 ERECTOR   4 6          
84 HELPERS, CRAFT 30         50   57
85 LABOURER 35         150   40
86 OFFICE ATTENDANT   1 1          
87 JANITOR           2   6
  SUB-TOTALS 157 334 409 7 29 218 4 125
  TOTAL OF ALL – 1,283